Table of Contents
Advertisement
10. STORAGE
Maintain the machine paying attention to the following in order to prevent the deterioration of the ma-
chine when storing it for a long time, over 1 month.
1)
CLEANING THE MACHINE
Clean the machine.
Grease each lubrication part.
2)
LUBRICATION POSITION OF EACH PART
Change all oil.
Be particularly careful when you reuse
the machine.
As oil can be diluted during storage.
Apply an anticorrosive lubricant on the
exposed part of piston rod of the cylin-
der and in places where the machine
rusts easily.
3)
MASTER SWITCH
Turn OFF the master switch and store the ma-
chine.
4)
Be sure to mix anticorrosive antifreeze solution
in the radiator.
5)
PREVENTION OF DUST AND MOISTURE
Keep machine dry. Store the machine setting
wood on the ground.
Cover exposed part of piston rod of cyl-
inder.
Lower the bucket to the ground and set
a support under the tires.
Lubricating manifold (left, 4EA)
Lubricating manifold (left, 4EA)
Center pivot pin (upper, 1EA)
Center pivot pin (lower, 1EA)
Steering cylinder rod (2EA)
Boom cylinder pin (rod side, 2EA)
Bellcrank (6EA)
Boom and bucket connecting pin (2EA)
Bucket link connecting pin (2EA)
Boom cylinder pin (frame side, 2EA)
4-22
Hide quick links:
Advertisement
Table of Contents
