Check Before Starting The Engine - Hyundai HL930A Operation & Maintenance Manual

2. CHECK BEFORE STARTING THE ENGINE

1) Make sure that the steering frame lock bar is
stored in the unlocked position.
The steering frame lock bar must be re-
moved in order to steer the machine.
2) Look around the machine and under the ma-
chine to check for loose nuts or bolts, collection
of dirt, or leakage of oil, fuel or coolant and
check the condition of the work equipment and
hydraulic system. Check also for loose wiring
and collection of dust at places which reach
high temperatures.
Refer to the daily check on page 6-8.
3) Adjust the seat to fit the contours of the opera-
tor's body for pleasant operation.
4) Make sure that the machine is equipped with a
lighting system that is adequate for the job con-
ditions. Ensure that all lights are in proper work-
ing condition.
5) Adjust the rear view mirror.
6) Make sure that there is no personnel in the area before you start the engine. Make sure
that there is no personnel in the area before you move the machine. Make sure that there
is no personnel on the machine, underneath the machine or around the machine.
Check that engine hood and all covers are to be closed and locked.
If a warning tag is attached to the starting switch or to the controls, do not start the
engine. Also, do not move any controls.
4-2
Check before
starting
Front
frame
Lock bar
unlock position