Hyundai HL930A Operation & Maintenance Manual page 81

Kick down mode
Kick down switch
Joystick steering
FNR RCV
Clutch cut off (C.C.O) mode
• Four modes are available for operator's preference and job condition.
- OFF
- L (Low)
- M (Medium)
- H (High)
• The clutch cut off functions of the left brake pedal depend on the position of the left brake pedal
and the setting of the clutch cut off mode.
Clutch cut off mode
• Manual mode (shift mode: manual)
It is effective 2
push the switch one more time.
• Automatic mode (shift mode : AL, AN, AH)
- Mode 1 (down/up)
It shifts down quickly from current gear to one step lower speed by pushing
the switch and recovers to current speed quickly when pushing the switch
one more time.
- Mode 2 (down only)
It shifts down from current gear to one step lower speed when pushing the
switch every time.
The kick down function is released in 1
The normal autoshift function continues after the kick down
switch is released.
: The clutch cut off function is disabled.
: The clutch is disengaged early for short-distance and rapid loading.
: The clutch is disengaged normally for general digging and loading operation.
: The clutch cut off function is automatically adjusted depending on slope angle or machine load
and inching function becomes possible by using the brake pedal.
Positions for clutch cut off function
nd st
speed to 1 speed only and recover to 2
L M
3-23
nd
speed quickly when
st speed only.
M mode
L mode
H mode
Left brake pedal
H