Hyundai HL930A Operation & Maintenance Manual page 164

(3) Check if the pilot cut off switch is locked (with the switch OFF)
(4) Turn the starting switch to START position to start the engine.
Do not crank the engine for more than 20 seconds. If the engine does not start,
allow the starter to cool for about 2 minutes before attempting to start the engine
again.
(5) Release the starting switch instantly after the engine starts to avoid possible damage to the
starting motor.
Refer to the page 0-14.
3) STARTING THE ENGINE IN COLD WEATHER
Sound the horn to warn surroundings
after checking if there are obstacles in
the area.
Replace the engine oil, coolant and fuel
referring to recommended oils at page
6-6.
Fill the anti-freeze solution to the cool-
ant as required.
If you turn ON the starting switch, the
fuel warmer is automatically operated
to heat the fuel by sensing the coolant
temperature.
(1) Check if the parking brake is locked (with
the parking switch ON).
(2) Check if the gear selector lever is in the
neutral position.
(3) Check if the pilot cut off switch is locked
(with the switch OFF)
(4) Turn the starting switch to the ON position, and wait 1–2 minutes. More time may take accord-
ing to ambient temperature.
(5) Start the engine by turning the starting switch to the START position after the preheater pilot
lamp and fuel warmer pilot lamp OFF.
If the engine does not start, allow the starter to cool for about 2 minutes before
attempting to start the engine again.
(6) Release starting switch immediately after starting the engine. The starting switch will auto-
matically return to the ON position.
After the engine starts, the preheating function is actuated to reduce the white
smoke.
Before the warming-up operation is completed, do not operate the equipment.
Operate the machine at less than normal loads and at slow idle speed right after
engine warming-up.
START
4-4
Preheat pilot
lamp OFF
Fuel warmer
pilot lamp
OFF
ON
OFF