Hyundai HL930A Operation & Maintenance Manual page 136

Wheel loader
Hide thumbs Also See for HL930A:
Table of Contents

Advertisement

d.
Balance control
To adjust the left-right speaker balance, first select the balance mode by pressing SEL button (2)
repeatedly until BAL indication appears on the display panel. Then turn knob (2) right or left within
5 seconds to adjust the balance as desired. The balance position will be shown by the bars on the
display panel from BAL 10R (full right) to BAL 10L (full left).
e.
Fader control
To adjust the front-rear speaker balance, first select the fader mode by pressing SEL button (2) re-
peatedly until FADER indication appears on the display panel. Then turn knob (2) right or left within
5 seconds to adjust the front-rear speaker level as desired. The fader position will be shown by the
bars on the display panel from FAD 10F (full front) to FAD 10R (full rear).
f.
EQ control
You can select an equalizer curve for 4 music types (CLASSIC, POP, ROCK, JAZZ). Press button
(2) until EQ is displayed, then turn knob (2) right or left to select the desired equalizer curve. Each
time you turn the knob, LCD displays as follows :
EQ OFF
CLASSIC
When the EQ mode is activated, the BASS and TREBLE modes are not displayed.
g.
Loud control
When listening to music at low volume levels, this feature will boost the bass and treble response.
This action will compensate for the reduction in bass and treble performance experienced at low
volume.
To select the loudness feature, press button (2) until LOUD is displayed, then turn knob (2) right or
left to activate or deactivate loudness.
h.
Beep control
To adjust the BEEP mode, first select the BEEP mode by pressing button (2) repeatedly until BEEP
indication appears on the display panel. Then turn knob (2) left or right within 5 seconds to select
BEEP 2ND, BEEP OFF or BEEP ON.
BEEP 2ND
BEEP OFF
BEEP ON
Mute control
a.
Press and hold MUTE button (3) for over 2 seconds to mute sound output and MUTE ON will blink
on the LCD. Press the button again to cancel MUTE function and resume to normal playing mode.
Mode selection
a.
Repeat press MODE button (3) to switch between FM1, FM2, AM, USB, AUX, BT MUSIC.
If there is no USB, AUX, Bluetooth Phone connected, it would not display USB, AUX, BT
when you press button (3).
POP
ROCK
JAZZ
:
You will only hear the beep sound when the buttons are held down for more
than 2 seconds.
:
You can not hear the sound beep when you press the buttons.
:
You can hear the beep sound each time you press the buttons.
3-78

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hl930a xt

Table of Contents