Operation; Suggestion For New Machine - Hyundai HL930A Operation & Maintenance Manual

Wheel loader
Hide thumbs Also See for HL930A:
Table of Contents

Advertisement

1. SUGGESTION FOR NEW MACHINE

1)
It takes about 100 operation hours to enhance
its designed performance.
2)
Operate according to the below three steps and
avoid excessive operation for the initial 100
hours.
Service meter
Until 10 hours
Until 100 hours
After 100 hours
Excessive operation may deteriorate
the potential performance of the ma-
chine and shorten the lifetime of the
machine.
3)
Be careful during the initial 100 hours' operation
(1) Check daily for the level and leakage of coolant, engine oil, hydraulic oil and fuel.
(2) Check and fill the lubrication regularly. Grease all lubrication points daily.
(3) Tighten bolts.
(4) Warm up the machine fully before operation.
(5) Check the gauges during operation.
(6) Check if the machine is operating normally during operation.
4)
Replace the following after the initial operation hours.
Checking items
Engine oil and filter
Fuel filter element
Fuel pre-filter
Transmission oil and filter
Axle oil (front and rear)
Hydraulic oil return filter
Pilot line filter element
Load
About 60%
About 80%
100%
4-1

OPERATION

Avoid excessive
operation for
initial 100 hours
Hours
250

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hl930a xt

Table of Contents