Table of Contents
Advertisement
3. LOADING THE MACHINE
1)
Load and unload the machine on a flat ground.
2)
Use the gangplank with sufficient length, width,
thickness and gradient.
3)
Move slowly and carefully when the machine is
on the gangplank.
Do not change the direction of the machine
while it is on the gangplank.
4)
Do the following after loading the machine to
the trailer.
(1) Lower the working equipment gently after
the location is determined.
Place a rectangular timber under the
bucket cylinder to prevent it from being
damaged during transportation.
Do not operate any other device when
loading.
Balance the load.
5-3
Hide quick links:
Advertisement
Table of Contents
