(3) If equipped, at the rear of the rocker lever, re-
move the banjo bolt and sealing washers con-
necting the breather oil drain line to the rocker
lever cover.
Some engine the breather oil drain line
is internal to the breathe connection
tube (1).
Do not remove the rocker lever gasket
on engines in which the rocker lever
cover gasket is fit into a groove at the
base of the rocker lever cover. The gas-
ket is reusable. Once the gasket is re-
moved from the rocker lever cover, it
must be replaced.
(4) Remove the mounting nuts and isolators from
the rocker lever cover.
If equipped, it may be necessary to gen-
tly pry the breather tube connection
from the back of the rocker lever cover
while removing.
(5) Remove the rocker lever cover.
Check the gasket while it is installed in
the valve cover. Once the gasket is re-
moved from the cover it must be re-
placed.
(6) Check the gasket for cracks on the sealing sur-
face.
Replace the gasket if damage is present.
Replace the gasket if it is removed from the
groove in the rocker lever cover.
6-32