Octp Error Message Troubleshooting; Onecontrol Touch Panel Error Messages - Lippert Components Ground Control TT Installation And Owner's Manual

Leveling onecontrol touch panel
Hide thumbs Also See for Ground Control TT:
Table of Contents

Advertisement

OneControl Touch Panel Error
Message Troubleshooting

OneControl Touch Panel Error Messages

Touch Panel Message
Touch Panel Message
"EXCESS ANGLE"
"EXCESSIVE ANGLE"
"BAD CALIBRATION"
"FEATURE DISABLED"
"LOW VOLTAGE"
"OUT OF STROKE"
"EXTERNAL SENSOR"
"JACK TIME OUT"
"AUTO LEVEL FAILURE"
"FUNCTION ABORTED"
"HALL POWER SHORT"
"CAN'T COMPLETE
LEVEL IN THIS
LOCATION. PLEASE
RELOCATE RV TO
FLATTER TERRAIN"
lci1.com
Why?
Why?
Unsecured sensor.
Uneven or sloped site.
Excessive angle reached during manual operation.
Trailer zero point was not set correctly.
Hitch recognition requested but no hitch height set.
Zero point not set.
Bad connection or wiring.
Discharged or bad battery.
Unsecured sensor.
Uneven or sloped site.
Bad connection or wiring.
System could not level in expected time.
Unsecured sensor.
Voltage drop.
User has aborted an automatic leveling sequence.
Short circuit detected on one or more of the
jack hall effect power lines.
The trailer is parked on a steep incline during
auto level. The front cannot be leveled and the
front jacks are already fully retracted.
574-537-8900
Ground Control
Leveling OneControl
Touch Panel
Installation and Owner's Manual
(For Aftermarket Applications)
What should be done?
What should be done?
Check and secure sensor placement.
Relocate the trailer.
Stop manual operation and reset jacks to a more
level state. The code will self-clear. There is no
need to hit "OK."
Reset zero point.
Perform AUTO LEVEL sequence to establish
hitch height.
Set zero point.
Check wiring - repair or replace.
Test battery voltage under load - charge or replace.
Check and secure sensor placement.
Relocate the trailer.
Replace or repair connection to rear remote sensor.
Check disposition of jacks.
Check and secure sensor placement.
Test battery voltage under load - charge or replace.
Restart the sequence.
Check harness and replace or repair.
Relocate the trailer.
29
CCD-0002700
TT
®
®
(3K-5K)
Rev: 03.02.21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

799870

Table of Contents