Onecontrol Touch Panel Diagram - Lippert Components Ground Control TT Installation And Owner's Manual

OneControl Touch Panel Diagram

jack buttons in
manual mode,
see figure 35
Fig.32
Callout Description
Jack Buttons - Select FRONT, REAR, RIGHT and LEFT jacks to be operated depending on mode.
Jacks available to be operated will be highlighted in blue.
A
Only the Power Tongue Jack can be operated in Standard Mode (Fig.32).
In Manual Mode (Fig.32), all leveling jacks are available to be operated (No Power Tongue Jack operation available).
B Up and Down Arrows - Scrolls through options on screen.
C Info - Displays system information, e.g. angle, jack stroke or software version.
D Options Icon - Press to program zero point/wireless configurations.
E Home Icon - Returns screen to home page.
F Auto Retract - Enters Auto Retract mode to retract all jacks. Power Tongue Jack does not retract.
G Manual Mode - Enters Manual Mode to manually operate jacks.
H ENTER - Push to select various modes.
I RETRACT - Retracts jacks in several modes. Jacks available will have a red stroke on button.
J EXTEND - Extends jacks in several modes. Jacks available will have a red stroke on button.
K RESET - Resets to factory default.
L Power Button - Turns touch panel on and off.
M AUTO LEVEL - Starts the auto leveling sequence.
N AUTO HITCH - Returns trailer to previous hitch height for reconnecting to tow vehicle.
lci1.com
A
I
574-537-8900
Ground Control
Leveling OneControl
Touch Panel
Installation and Owner's Manual
(For Aftermarket Applications)
leveling in standard mode
C
B
J K L M
19
TT
®
(3K-5K)
E
D
H
F
G
N
CCD-0002700
®
Rev: 03.02.21