Auto Leveling Control Touch Pad Diagram
Callout Description
A
Red/Green LED - Indicates the status of the system.
B
Up Arrow - Extends the Power Tongue Jack.
C
Down Arrow - Retracts Power Tongue Jack.
D
Auto Level Button - Places leveling system into auto level mode.
E
Hitch Height Button - Initiates the Hitch Recognition feature.
F
Retract All Button - Places leveling system into full retract mode. Power Tongue Jack does not retract.
Auto Leveling Control Touch
Pad Operation
Basic Power Tongue Jack Operation
1. To turn on the touchpad, press both Up and Down
Arrow buttons (Fig.31B and C) at the same time. The green
indicator LED (Fig.31A) will turn on.
NOTE: The touchpad will remain on as long as the user
is pressing buttons. It will time out after approximately five
minutes without use.
2. Press the Up Arrow button (Fig.31B) to extend the Power
Tongue Jack.
3. Press the Down Arrow button (Fig.31C) to retract the
Power Tongue Jack.
lci1.com
B
C
Fig.31
574-537-8900
Ground Control
Leveling OneControl
Touch Panel
Installation and Owner's Manual
(For Aftermarket Applications)
A
D
To turn on the touchpad, press the Up and Down Arrow
buttons at the same time
Unhitching from the Tow Vehicle
4. Prior to unhitching from the tow vehicle, make sure the
trailer is parked on a level surface and chock the tires of
the trailer.
5. Make sure the footpad of the Power Tongue Jack is
pinned securely in place with the clevis pin and hairpin
cotter pin.
6. Disconnect any wires, chains, or sway control that
may be equipped between the tow vehicle and the trailer.
Unlatch the trailer coupler.
7. Turn on the Auto Leveling Control Touch Pad.
8. Press the Up Arrow button (Fig.31B) on the Auto Leveling
Control Touch Pad to extend the Power Tongue Jack and
lift the front of trailer to take the weight of the trailer off of
the hitch.
17
TT
®
(3K-5K)
E
F
CCD-0002700
®
Rev: 03.02.21