5K-Short Jack Manual Override - Lippert Components Ground Control TT Installation And Owner's Manual

Jack Manual Override Nut:
3/4
Tools needed: " socket wrench
1. Locate the manual override nut (Fig.45A).
3/4
2. Place
" socket wrench over the manual override nut
(Fig.45A) and turn the override nut until the jack extends or
retracts to desired position.
A
Fig.45

5K-Short Jack Manual Override

Top of Jack Motor Override:
3/8
Tools needed:
" drive ratchet and extension (no socket)
1. Find the port on the top of the jack motor (Fig.46A).
2. Remove the rubber plug (Fig.46A).
3/8
" drive ratchet into the port (Fig.47A).
3. Insert the
4. Turn the override until the jack extends or retracts to
desired position.
5. Replace the rubber plug (Fig.46A).
B
Fig.46
lci1.com 574-537-8900
Ground Control
Leveling OneControl
Touch Panel
Installation and Owner's Manual
(For Aftermarket Applications)
A
Fig.47
Bottom of Jack Motor Override:
Tools needed:
1. Find the port on the bottom of the jack motor (Fig.46B).
2. Remove rubber plug (Fig.48A) on the bottom of the jack.
Fig.48
5/16
" socket into the port and onto the nut (Fig.49A).
3. Insert
4. Turn the override until the jack extends or retracts
to desired position.
5. Remove the drive ratchet from the port.
6. Replace the rubber plug (Fig.48A).
A
Fig.49
32
(3K-5K)
3/8
" drive ratchet and extension,
A
A
CCD-0002700
TT
®
®
5/16
" socket
Rev: 03.02.21