Auto Leveling Control Touch Pad Troubleshooting; Red/Green Led Indicator; Error Display In Octpanel Or Onecontrol App - Lippert Components Ground Control TT Installation And Owner's Manual

Auto Leveling Control Touch
Pad Troubleshooting

Red/Green LED Indicator

What is happening? What is happening?
Off
Solid Green
Blinking Green
Solid Red
Blinking Red
Error Display in OneControl Touch Panel or
OneControl App
Errors can only be cleared via the OneControl Touch Panel
or OneControl Leveling App. The only exception is when
the Auto Leveling Control Touch Pad (Fig.31) was used
to abort an auto-sequence. In this case the error can be
cleared by pressing any AUTO LEVELING CONTROL
button. To clear an error, correct the issue, then press
OK. If the error is still present, the message will be
displayed again.
lci1.com
Why? Why?
Touch panel is locked.
Touch panel is active.
Jacks are moving.
Low battery.
Error - Refer to OneControl
Touch Panel screen or the
Leveling App for the specific
error, then consult the
Troubleshooting section to clear
the error.
574-537-8900
Ground Control
Leveling OneControl
Touch Panel
Installation and Owner's Manual
(For Aftermarket Applications)
28
CCD-0002700
TT
®
®
(3K-5K)
Rev: 03.02.21