Octp Standard Mode Features; Octp Manual Mode Features; Octp Unhitching From Tow Vehicle - Lippert Components Ground Control TT Installation And Owner's Manual

OneControl Touch Panel Standard Mode Features
1. Press EXTEND (Fig.32I) or RETRACT button (Fig.32H)
and FRONT button (Fig.32A) to extend or retract the Power
Tongue Jack.
2. Press the AUTO LEVEL button (Fig.32M) to start the auto
leveling sequence.
3. Press the AUTO HITCH button (Fig.32N) to start the
hitch recognition sequence when reconnecting to the
tow vehicle.
4. Use the Up or Down Arrow buttons (Fig.32B) to cycle
through the menu screen options:
A. Info: Scroll to "Info" (Fig.32C) and press ENTER button
(Fig.32G) to display system information, e.g., angle, jack
stroke or software version.
B. Auto Retract: Scroll to "Auto Retract" (Fig.32F) and
press ENTER button to start the auto retract sequence,
which will retract all jacks. The Power Tongue Jack does
not retract.
C. Manual Mode: Scroll to "Manual Mode" (Fig.32G)
and press ENTER button to start the manual
leveling operation.
OneControl Touch Panel Manual Mode Features
The jacks operate in pairs. While in manual mode, the
jacks operate individually, the Twist Protection Prevention
System has been activated to prevent frame twist. The
OneControl Touch Panel or OneControl App will display
"Relieving frame twist." The jacks will resume operating in
pairs when potential frame twist has been relieved.
1. Press EXTEND (Fig.35F) or RETRACT (Fig.35E) button
and FRONT button (Fig.35A) to operate front jacks.
2. Press EXTEND or RETRACT button and REAR button
(Fig.35C) to operate rear jacks.
3. Press EXTEND or RETRACT button and RIGHT button
(Fig.35B) to operate right jacks.
lci1.com 574-537-8900
Ground Control
Leveling OneControl
Touch Panel
Installation and Owner's Manual
(For Aftermarket Applications)
4. Press EXTEND or RETRACT button and LEFT button
(Fig.35D) to operate left jacks.
NOTE: To operate jacks individually, press EXTEND or
RETRACT button, then press the LEFT (Fig.35D) or
RIGHT button (Fig.35B) while simultaneously pressing the
FRONT (Fig.35A) or REAR button (Fig.35C), depending on
which jack needs to be operated.
OneControl Touch Panel Unhitching from
Tow Vehicle
1. Prior to unhitching from the tow vehicle, make sure the
trailer is parked on a level surface and chock the tires of
the trailer.
2. Make sure the footpad of the Power Tongue Jack is
pinned securely in place with the clevis pin and hairpin
cotter pin.
3. Disconnect any wires, chains, or sway control that
may be equipped between the tow vehicle and the trailer.
Unlatch the trailer coupler.
4. Press EXTEND (Fig.32J) and FRONT button
(Fig.32A) on the OneControl Touch Panel in Standard Mode
to extend the Power Tongue Jack until the footpad touches
the ground and the coupler clears the hitch ball.
NOTE: If using the OneControl Touch Panel and the hitch
is not visible, a second person will be needed to monitor
the operation of the unhitching process.
5. Pull tow vehicle away and park at a safe distance.
NOTE: To utilize the Power Tongue Jack for the unhitching
process see Power Tongue Jack Operation section.
21
CCD-0002700
TT
®
®
(3K-5K)
Rev: 03.02.21