Pre-Operation Checklist - Wallenstein LXT95 Operator's Manual

4�4

PRE-OPERATION CHECKLIST

Efficient and safe operation of the Wallenstein Log
Grapple Trailer requires that each operator reads
and understands the safe use procedures and all
related safety precautions outlined in this section. A
pre-operation checklist is provided for the operator.
It is important for both the personal safety and
maintaining good mechanical condition that this
checklist is followed.
Before operating Trailer and each time thereafter, the
following areas should be checked off:
Pre-Operation Checklist
LX Series Boom & Grapples
Lubricate the machine per the schedule outline in
the Maintenance Section.
Check that all boom pivot points move freely.
Check that the grapple and pivot move freely.
Check that stabilizers move freely.
Check for leaks in the hydraulic system. Tighten
leaking fittings, cylinders or rotator. Repair or
replace any damaged components.
Make sure that all guards and shields are in place,
secured and functioning as designed
Check all fasteners and hardware, retorque if
required.
Follow the pre-operation check in your engine
owners manual.
Check hydraulic reservoir. Top up as required.
Check for entangled material. Remove all entangled
material before resuming work.
Check for leaks in the hydraulic system. Tighten
leaking fittings. Repair or replace any damaged
components.
Check tire pressure. Inflate as required.
Check wheel lugs
Check mounting legs are securely pinned (dumper
or flat bed only)
Check adjustable tandem is pinned (LT30 only)
LX Series Three Point Hitch
Check all fasteners and hardware on the 3 PH and
adaptor, retorque if required.
30
LX Power Packs
LT Series Trailer
P