Wallenstein LXT95 Operator's Manual page 57

On a regular basis check the condition of all hydraulic lines,
hoses and fittings. Replace any that are damaged. Re-route
those that are rubbing, pinched or crimped. Tighten any fitting
that is leaking. Ensure fittings are clean and free of dirt.
20
21
18
22
19
Chart below shows location of grease zerks on the LXT series grapples.
Location
18
19
20
21
22
23
24
25
26
27
Cut away view show-
ing grapple grease
points
Grease Points - 50 hrs or Annually
Grapple Outside Arm Pivot-1
Grapple Outside Arm Pivot-2
Grapple Outside Arm Linkage Pivot-1
Grapple Outside Arm Linkage Pivot-2
Grapple Cylinder Rod End Pivot
Grapple Cylinder Butt End Pivot
Grapple Inside Arm Pivot-1
Grapple Inside Arm Pivot-2
Grapple Inside Arm Linkage Pivot-1
Grapple Inside Arm Linkage Pivot-2
57
24
26
23
25
27