General - Wallenstein LXT95 Operator's Manual

7�3

GENERAL

1. Ensure the load is balanced. Read section 5.3.1
on Load distribution
2. Check torque on wheel lugs.
3. LT30 - Manual Tandem Adjust: to prevent the
tandem from moving during transport ensure
the tandem pin is in and secured. Not required
for hydraulic tandem�
4. Comply with Provincial / state and local laws
governing safety and transporting of machinery
on public roads.
5. Do not transport or move the trailer with the
engine running.
6. Ensure boom is secured with the boom pin lock
and the stabilizers are fully retracted
7. Align the boom lengthways with the trailer and
Caution:
• Highway: Do not exceed 50 mph (80 km/h)
maximum highway travel speed.
• Off road: Do not exceed 50 km/h (30 mph)
maximum safe off road travel speed.
clamp grapple to the frame or log before moving
or transporting.
8. Always attach a safety chain between the hitch
and the tow vehicle.
9. If equipped, ensure dump box, or flat bed
mounts are pinned and secured.
10. Inspect rims for dents or damage.
11. Inspect tires for cuts or damage, check tire
pressure and top up if required,
12. LT30, check the swing jack is in the up position
and secured with the snapper pin. LT60, check
side wind jack is in the up position and the
extension is secured with the latch pin.
13. Never allow riders on the machine.
14. Just before transport, perform a circle check to
ensure everything is safe and secure.
15. Secure the load by strapping it down when
preparing to transport.
52