Table of Contents
Advertisement
5
FIELD OPERATION
•
Please remember it is important that you read
the operator's manual and heed the safety
signs on the machine. They are there for your
safety, as well as the safety of others. The
safe use of this machine is strictly up to you,
the operator.
•
Before moving, making, adjustments or
servicing, put the machine in safe condition:
• install boom pin lock
• shut off the engine
• turn fuel valve off
• ensure load is secure
• secure the trailer from movement
•
Review section 2.6 on Boom Safety and set up
the operator safe zone and work zone.
•
Extend stabilizers to support frame during
loading and unloading.
•
Position the trailer to provide a firm base
for the stabilizer pads before loading or
unloading.
•
Stay away from overhead utilities and
obstructions. Review position of power lines.
•
Stay 15m (50 ft) away from power lines.
Electrocution can occur without direct contact.
•
Keep all bystanders out of the work zone, at
least 6m (20ft) feet away from trailer, grapple
and logs when loading or unloading or when
engine is running.
•
Position the controls and operate the machine
opposite the work zone.
The operator has the responsibility of being familiar with all operating and safety
procedures and following them�
OPERATING SAFETY
39
•
Be aware of your operator safe zone, and
keep boom and material out.
•
Do not run machine inside a closed building
to prevent asphyxiation from engine exhaust.
•
Do not move or carry people on boom or
grapple.
•
Never use alcoholic beverages or drugs which
can hinder alertness or coordination while
operating this equipment. Consult your doctor
about operating this machine while taking
prescription medications.
•
Do not allow riders on this machine at any
time. There is no safe place for any riders.
•
Never allow children or unauthorized people
to operate or be around this machine.
•
When operating this equipment it is
recommended to have at least 2 operators
present and trained in safe operation of the
machine. All operators must be completely
familiar with all components of the machine
and their function.
•
Keep hydraulic lines and fittings tight, in good
condition and free of leaks.
•
Keep the working area clean and free of
debris to prevent tripping. Operate only on
level ground.
•
Do not overload lift or trailer capacity.
•
Review safety instructions annually.
Advertisement
Table of Contents
