Subscribe to Our Youtube Channel
Related Manuals for Wallenstein WX900 Series
Summary of Contents for Wallenstein WX900 Series
- Page 1 OPERATOR'S MANUAL Serial number 1100760 and up WX 900 Series Log Splitter Rev Aug-2023 Part Number: Z97136_En...
-
Page 2: Table Of Contents
WX900 Series Log Splitter Table of Contents 1. Introduction ............3 8. Storage ..............31 1.1 Delivery Inspection Report ........4 8.1 Storage Safety ............31 1.2 Serial Number Location ..........5 8.2 Put the Machine in Storage ........31 1.3 Types of Labels on the Machine ........ 6 8.3 Remove the Machine from Storage ...... -
Page 3: Introduction
US Customary (SI metric). Keep this manual handy for frequent reference and to pass on to new operators or owners. Call your Wallenstein dealer or distributor if you need assistance, information or additional copies of the manuals. -
Page 4: Delivery Inspection Report
Introduction Log Splitter 1.1 Delivery Inspection Report Wallenstein WX950, WX960, and WX970 Log Splitter To register your product and start the warranty, go to WallensteinEquipment.com. This form must be completed by the dealer at the time of delivery, and then signed by the dealer and customer. -
Page 5: Serial Number Location
WX900 Series Introduction Log Splitter 1.2 Serial Number Location Always provide the model and serial number of your Wallenstein product when ordering parts, or requesting service or other information. The product information plate location is shown in the illustration. For future convenience, record the product Model and Serial Number in the spaces provided below. -
Page 6: Types Of Labels On The Machine
This type of label provides information for the operator or shows the operation of When getting familiar with the Wallenstein product, notice that a control. there are numerous labels located on the machine. There are different types of labels for safety, information, and product identification. -
Page 7: Safety
YOU are responsible for the safe operation and maintenance of DANGER your Wallenstein product. YOU must make sure that you and Identifies a hazardous situation that, if not avoided, will result in anyone else who uses, maintains, or works around the machine serious injury or death. -
Page 8: Safety Rules
W016 • Prolonged exposure to loud noise may cause permanent hearing loss. Power Wallenstein Equipment puts considerable effort into designing equipment with or without a vehicle products that are safe to use; however, it is also the attached can often be noisy enough to responsibility of the operator to use the equipment safely. -
Page 9: Equipment Safety Guidelines
WX900 Series Safety Log Splitter 2.5 Equipment Safety Guidelines 2.7 Safety Training Safety is one of the main concerns in designing and developing An untrained operator can cause serious injury or death to equipment. However, every year many accidents occur which themselves or others. -
Page 10: Sign-Off Form
WX900 Series Safety Log Splitter 2.8 Sign-Off Form The design and manufacture of this product conforms to the applicable provisions in the following standards: Everyone who uses this machine must read and fully understand all safety, operation, and maintenance information in this •... -
Page 11: Safety Labels
WX900 Series Safety Labels Log Splitter 3. Safety Labels WARNING! Replace all safety labels that are missing, damaged, or illegible. If a component is replaced and it has a safety label on it, apply a safety label to the new component. Operating the machine... -
Page 12: Safety Label Locations
WX900 Series Safety Labels Log Splitter 3.1 Safety Label Locations Numbers correspond with the Safety Label Definitions on page 02198 Figure 2 – Safety label locations (typical) -
Page 13: Safety Label Definitions
• Always replace safety labels that are missing or have become illegible. Replacement safety labels are available 2. WARNING! through your local Wallenstein Equipment dealer or Crush hazard distributor. • Keep the safety labels clean and legible at all times. -
Page 14: New Operator
WX900 Series Safety Labels Log Splitter 4. Familiarization Wallenstein log splitters are designed to split logs into smaller portions. A gas engine provides power to the machine. 4.1 New Operator WARNING! Make sure all operators understand how to place the machine in a safe condition before performing any service, maintenance work, or storage preparation. -
Page 15: Machine Components
WX900 Series Safety Labels Log Splitter 4.3 Machine Components 02200 Figure 3 – WX950, WX960, and WX970 log splitter components 1. Safety chains 2. Trailer tongue 3. Stop block 4. Shelf 5. Splitting wedge 6. Engine 7. Log lifter shelf control lever 8. -
Page 16: Controls
WX900 Series Controls Log Splitter 5. Controls Before operating the machine, be familiar with the location and function of the controls. 5.1 Engine Controls WARNING! Before starting the engine, read and understand the safety and operating information under Engine Operation Safety on page 21. -
Page 17: Hydraulic Controls
5.1.4 Recoil Starter 5.2 Hydraulic Controls WARNING! The WX900 series log splitters have two hydraulic control valves. The splitter-control valve moves the splitting wedge. The Fast retraction of the starter cord (called log lifter control valve moves the log lifter shelf. - Page 18 WX900 Series Controls Log Splitter 5.2.1 Splitter Control 5.2.2 Log Lifter Shelf Control 00656 00644 Figure 10 – Log lifter shelf control valve 1. Lower Figure 9 – Splitter-control valve 2. Stop 3. Lift 1. Extend 2. Stop Lower position 3.
-
Page 19: Operating Instructions
Operating Instructions Log Splitter 6. Operating Instructions Wallenstein WX900 Series log splitters are self-contained • Attach all guards and shields, and close all covers before machines designed to push wood through a wedge to split it. starting the machine. If a guard, shield, or cover was removed, install it. -
Page 20: Before Starting The Engine
WX900 Series Operating Instructions Log Splitter 6.2 Before Starting the Engine 6.3 Pre-Start Checklist 1. Check the engine oil level. See page 22. Do the following before you start the machine the first time and every time thereafter: 2. Check the hydraulic fluid level. See page 25. -
Page 21: Machine Break-In
WX900 Series Operating Instructions Log Splitter 6.4 Machine Break-In 6.5 Engine Operation Although there are no operational restrictions on the log CAUTION! splitter when used for the first time, it is recommended that the following items be checked: Before starting the engine, review the safety,... - Page 22 WX900 Series Operating Instructions Log Splitter 6.5.2 Check the Engine Oil Level • Store fuel away from all wood material. • Only operate the engine in a location that has good air IMPORTANT! For more information about engine oil, see flow.
- Page 23 WX900 Series Operating Instructions Log Splitter 6.5.3 Add Oil to the Engine 6.5.4 Check the Fuel Level IMPORTANT! For more information about engine oil, see CAUTION! the engine manufacturer's manual and Engine Oil on page Check the fuel level outdoors or in an area where there is good air flow.
-
Page 24: Hydraulic System Operation
WX900 Series Operating Instructions Log Splitter 6.5.5 Add Fuel to the Engine 6.6 Hydraulic System Operation Fuel tank capacity: 0.82 US gal (3.1 L). IMPORTANT! Check the hydraulic fluid quality every 50 hours. If the fluid is dirty or smells burnt, replace it. - Page 25 WX900 Series Operating Instructions Log Splitter 6.6.2 Check the Hydraulic Fluid Level 6.6.3 Add Hydraulic Fluid The hydraulic system uses Dexron® III ATF. Dexron VI or IMPORTANT! Do not operate machine if fluid level is not Mercon® are acceptable substitutes.
-
Page 26: Set Up The Machine
WX900 Series Operating Instructions Log Splitter 6.7 Set Up the Machine IMPORTANT! Park the log splitter on a level, dry work area free of debris and other objects. Position the log splitter so the prevailing wind blows engine exhaust away from the operator. -
Page 27: Start The Machine
WX900 Series Operating Instructions Log Splitter 6.8 Start the Machine 6.9 Stop the Machine WARNING! IMPORTANT! Do not choke the carburetor to stop the engine. Fast retraction of the starter cord (called kickback) pulls your hand and arm toward the 1. -
Page 28: Log Lifter Shelf
WX900 Series Operating Instructions Log Splitter 6.11 Log Lifter Shelf WARNING! Hands can be pinched, cut, crushed, or severed. If two or more people load or operate the machine together, a person can be seriously injured. Only one person must load and operate the machine. -
Page 29: Split Wood
WX900 Series Operating Instructions Log Splitter 6.13 Split Wood WARNING! Hands can be pinched, cut, crushed, or severed. If two or more people load or operate the machine together, a person can be seriously injured. Only one person must load and operate the machine. -
Page 30: Transport
WX900 Series Transport Log Splitter 7. Transport 7.2 Prepare for Transport IMPORTANT! Equipment that is transported on a public roadway must comply with the local laws that govern the • Lift the log lifter shelf to its highest position and retract the safety and transport of machinery. -
Page 31: Storage
WX900 Series Storage Log Splitter 8. Storage At the end of the season or when the machine is not going to be 8.2 Put the Machine in Storage used for an extended length of time, store the machine correctly to prevent damage. -
Page 32: Remove The Machine From Storage
WX900 Series Storage Log Splitter 8.2.1 Replace the Engine Fuel 8.3 Remove the Machine from Storage WARNING! 1. Review and follow the Pre-Start Checklist. See page 20 Before you replace the fuel, read and understand 2. Review safety and operation procedures. See Operating the information under Engine Operation Safety on Safety on page 19. -
Page 33: Service And Maintenance
WX900 Series Service and Maintenance Log Splitter 9. Service and Maintenance Fluids and Lubricants WARNING! The machine requires various fluids and lubricants for operation Risk of serious personal injury. Stop engine and maintenance. before performing ANY service or maintenance procedure. Reinstall all covers and shields 9.2.1 Lubricant Handling and Storage... - Page 34 WX900 Series Service and Maintenance Log Splitter 9.2.3 Engine Fuel For complete fuel information and use at high altitudes, see the engine manufacturer's manual. Fuel must meet the following specifications: • Clean, fresh, unleaded gasoline. • Minimum of 87 octane / 87 AKI (91 RON).
-
Page 35: Maintenance Schedule
WX900 Series Service and Maintenance Log Splitter 9.3 Maintenance Schedule IMPORTANT! For more information, see the engine manufacturer's manual. Complete maintenance tasks at the specified time or hour interval, whichever comes first. 600 hours 8 hours hours or hours or... -
Page 36: Grease Points
WX900 Series Service and Maintenance Log Splitter 9.4 Grease Points IMPORTANT! Do not over grease a bearing. Too much grease can cause the bearing seals to fail. Look for this type of label on the machine. Each label identifies a grease point and shows the greasing interval in hours. - Page 37 WX900 Series Service and Maintenance Log Splitter 9.4.1 Grease Fitting and Hinge/Pivot Point Locations Item Location Frequency Number of Locations Jockey wheel bearing 100 hours or annually Splitter bed sliding frame 40 hours or annually Log lifter shelf hinge 40 hours or annually...
-
Page 38: Hydraulic System Maintenance
WX900 Series Service and Maintenance Log Splitter 9.5 Hydraulic System Maintenance • Put on the correct eye protection when doing an inspection for a high-pressure hydraulic leak. The hydraulic system controls the splitting wedge and log lifter shelf. 9.5.1 Hydraulic System Maintenance •... - Page 39 WX900 Series Service and Maintenance Log Splitter 9.5.2 Change the Hydraulic Fluid 9.5.3 Change the Hydraulic Fluid Filter CAUTION! CAUTION! Risk of burns to exposed skin. Risk of burns to exposed skin. Hydraulic oil becomes hot during Hydraulic oil becomes hot during operation.
-
Page 40: Engine Maintenance
WX900 Series Service and Maintenance Log Splitter 9.6 Engine Maintenance 9.6.2 Engine Air Filter For full engine maintenance information, see the engine IMPORTANT! Operating the engine without an air filter, or manufacturer's manual. with a damaged air filter, can allow dirt to enter the engine, causing rapid engine wear. -
Page 41: Troubleshooting
The following table lists some problems that may be encountered, with possible causes and solutions. If a problem persists after reading through the Troubleshooting section, contact the local dealer, distributor or Wallenstein Equipment. Have the machine serial number ready. Problem... -
Page 42: Specifications
WX900 Series Specifications Log Splitter 11. Specifications 11.1 Machine Specifications For engine specifications, see the engine manufacturer's manual. For available accesories, go to WallensteinEquipment.com. Model WX950 WX960 WX970 Mounting Trailer mounted Engine make and horsepower Vanguard® 10 hp (305 cc) (displacement) 4.5"... -
Page 43: Bolt Torque
WX900 Series Specifications Log Splitter 11.2 Bolt Torque The tables shown give correct torque values for various Imperial Bolt Torque Specifications bolts and capscrews. Tighten all bolts to the torque values specified in the table, unless indicated otherwise. Torque Check tightness of bolts periodically. -
Page 44: Hydraulic Fitting Torque
WX900 Series Specifications Log Splitter 11.3 Hydraulic Fitting Torque Hydraulic Fitting Torque Specifications 1. Check flare and flare seat for defects that might Hex size cause leakage. Tube size across Flats from finger flats Torque tight 2. Align tube with fitting before tightening. -
Page 45: Warranty
Warranty Log Splitter 12. Warranty LIMITED WARRANTY Wallenstein products are warranted to be free of defects in materials and workmanship under normal use and service, for a period of Five Years for Consumer Use Two Years for Commercial/Rental Use from the date of purchase, when operated and maintained in accordance with the opera�ng and maintenance instruc�ons supplied with the unit. -
Page 46: Index
WX900 Series Index Log Splitter 13. Index Add fuel to the engine ���������������������������������������������������� 24 Grease ��������������������������������������������������������������������������� 34 Add hydraulic fluid ��������������������������������������������������������� 25 Grease fitting and hinge/pivot point locations ���������������� 37 Add oil to the engine ������������������������������������������������������ 23 Grease points ���������������������������������������������������������������� 36 Air filter ���������������������������������������������������������������������������... - Page 47 WX900 Series Index Log Splitter Engine operation������������������������������������������������������������ 21 Put the machine in storage �������������������������������������������� 31 Hydraulic system operation ������������������������������������������� 24 Remove the machine from storage�������������������������������� 32 Log lifter shelf ���������������������������������������������������������������� 28 Replace the engine fuel ������������������������������������������������� 32 Log placement ��������������������������������������������������������������� 28 Storage safety����������������������������������������������������������������...
- Page 48 WallensteinEquipment.com...
Need help?
Do you have a question about the WX900 Series and is the answer not in the manual?
Questions and answers