Table of Contents
Advertisement
4�5
CONTROLS
Please review this section to familiarize yourself with the location and function of each control before starting.
Familiarizing yourself with the controls will enable you to take advantage of all the features available on
the LX / LT and apply them as conditions demand.
4�5�1 LXT SERIES BOOM GRAPPLE HYDRAULIC CONTROL PANEL:
An optional Hydraulic Power Pack is available to connect to your tractor hydraulics. The L101 Tractor
Hydraulic Kit or the L400 3-PH kit , which includes the L101, must be purchased separately to do so.
The L301 or L601 Powerpack can also be used depending on the application..
The control panel is laid out so that the controls are easy to see and use.
are mounted on control panel attached to the main frame. The two outer levers control the position
of the stabilizers and the inner joy stick controls operate the function of the boom, dipper and
bucket.
As an added safety feature, the main boom has been fitted with an hydraulic "lock". Which means
that if hydraulic pressure is lost (broken hose, engine stops) the boom cylinder will keep its position
until hydraulic pressure is returned.
Below the main controls is a Option / Accessory Control Mount , for the optional Hydraulic Tandem
control (LX95 factory installed) and Hydraulic Winch Accessory control (LX95 / LX115).
Boom Rotation
Left Stabilizer
Up / Down
Manual Tube
1. Left and Right Stabilizer Controls:
The levers located on the far left and far right.
These 2 position spring-loaded-to-neutral-center
levers control the flow of oil to the stabilizer
cylinder.
•
Push and hold to lower the stabilizer to the
desired position.
•
Pull and hold the lever to raise the stabilizer.
•
Release the lever when the stabilizer is in its
desired position, and it will spring return to
its neutral position.
Grapple
Open / Close
Main Boom:
Up / Down &
31
All hydraulic control valves
Dipper Boom:
Up / Down &
Grapple Rotation
Right Stabilizer
Up / Down
Option / Accessory
Control Mount
Advertisement
Table of Contents
