Lx Series Hydraulic Power Packs - Wallenstein LXT95 Operator's Manual

4�5�2 LX SERIES HYDRAULIC POWER PACKS:
The LXT Series have a LT trailer mount Hydraulic Power Pack kit accessory. The LX95 and LX115 each
have their own kit but both have similar features. The following describes the functions of the features
in each kit. The kit requires installation into the grapples hydraulic system.
Always read the engine Operator's manual
supplied with the machine for the detailed operating
procedures.
Before starting to work, all operators should
familiarize themselves with the location and
function of controls.
1� Gas Engine:
Always read the engine Operator's manual
supplied with the machine for detailed
procedures.
a. Ignition Switch:
This switch controls the electrical power
to the engine electrical system. Turn the
switch clockwise to turn the electrical
system ON and the engine will run. Turn
counter-clockwise to stop the engine.
b. Fuel Shut-Off Valve:
Each engine is equipped with a valve
between the fuel tank and the carburettor.
Slide the lever to the right to turn the fuel
OFF and left to turn ON. Turn the fuel OFF
before transporting.
c. Throttle:
This lever controls the engine RPM. Slide
the lever to the left to increase engine
speed and slide the lever to the right to
decrease.
d. Choke:
The choke controls the fuel/air mixture
to the engine. Move choke laterally to
the left, to close the choke when starting
when the engine is cold. Slide the lever to
the right to open the choke as the engine
warms. Always slide the lever fully to the
right when operating the machine.
e. Starting Rope:
This retracting rope and T-bar is used to
turn the engine over for starting. Grasp
the T-bar firmly and pull the rope sharply
to start the engine.
Throttle
Choke
Fuel Shut-
Off Valve
Starting
Rope
Honda GX200 - LX95 Power Pack
Throttle
Choke
Fuel Shut-
Off Valve
Honda GX270 - LX115 Power Pack
33
Starting
Rope
Ignition
Switch
Ignition
Switch