Quick Dials - Ricoh 1232 Series Operating Instructions Manual

- - Using the { { { { Tone} } } } key with On
- -
Hook Dial
Press the { { { { On Hook Dial} } } } key.
A
B Enter the fax number with the
number keys.
Press the { { { { Tone} } } } key.
C
D Enter the ID number with the
number keys.
- Sending tonal signals by ISDN -
- -
(Optional ISDN unit required)
You can still send tonal signals to a G3
user even if the machine is only con-
nected to an ISDN line.
Note
❒ This function can only be used for
Memory or Immediate Transmis-
sion. You cannot dial through
ISDN using On Hook Dial or Man-
ual Dial.
❒ When G4 is selected, the display
shows UUI after a tone indication
"•".
❒ When G3 is selected on ISDN line,
you can set the indication after a
tone indication "•" in the User Pa-
rameters: BP (tone) or UUI. See
p.113 "Changing the User Parame-
ters", Facsimile Reference (option)
<Advanced Features> (Switch11,
Bit1).

Quick Dials

When you have programmed a desti-
nation's number in a Quick Dial Ta-
ble, you can dial the number by just
selecting the destination from the
Quick Dial Table.
Additionally, you can store a name
that will appear on the display when-
ever you press that Quick Dial.
Preparation
You must program the fax number
of a destination for the Quick Dial
Table prior to using Quick Dials.
See p.38 "Quick Dial".
Note
❒ When you press the title key above
the destination keys, the destina-
tion keys programmed in that title
key appear.
❒ A stored name can be printed out
on the first page of a received fax at
the other end. See p.53 "Transmis-
sion Options", Facsimile Reference
(option) <Advanced Features> .
Reference
See p.29 "Dialing".
A A A A
Place your original, and then se-
lect any scan settings you require.
B B B B
Press the title key for the table
with the desired Quick Dial key.
Dialing
2
31