Getting Started
5.
Press to display various informa-
tion about transmission.
6.
Appears when a destination is en-
tered. Press [Clear] or the { { { { Clear/Stop} } } }
1
key to erase characters or numbers
one by one.
7.
Switches the transmission mode
between Memory Transmission and
Immediate Transmission.
Standby Display
While the machine is in standby mode (immediately after the { { { { Facsimile} } } } key is
pressed or after the { { { { Clear Modes} } } } key is pressed), the following display is
shown.
❖ ❖ ❖ ❖ Initial display
Note
❒ To return the machine to standby mode, do one of the following:
• If you have placed the original on the optional Document Feeder (ADF)
and have not pressed the { { { { Start} } } } key, remove the original.
• If you have not placed an original, press the { { { { Clear Modes} } } } key.
• If you are in User Tools mode, press the { { { { User Tools/Counter/Inquiry} } } } key.
8
8.
Displays Quick Operation Keys
set for often used functions. [TX sta-
tus display] and [Dest. Management] are
preset.
9.
Displays various functions for
transmitting.
10.
Displays the Quick Dial Table
of programmed destinations.