Preparing To Install The Tank Skid - Toro Multi Pro 41240 Operator's Manual

1. Left, rear corner of bed
2. Vehicle frame channel
3. Pivot plate
7. Lift the bed off the vehicle.
8. Stow the lift cylinders in storage clips.
2
Preparing to Install the
Tank Skid
Parts needed for this procedure:
Rear PTO Kit, Heavy-Duty Workman Vehicle
1
(HD-Series Models with a Manual Transmission)
High-Flow Hydraulics Kit, Workman HDX-Auto Utility
1
Vehicle (Non-TC—HDX-Auto Model)
Multi Pro WM Turf Sprayer Finishing Kit, Manual
1 Workman Utility Vehicle (HD-Series Models with a
Manual Transmission)
Multi Pro WM Turf Sprayer Finishing Kit, Automatic
1
Workman Utility Vehicle (HDX-Auto Model)
Installing the Rear PTO Kit for
Heavy Duty Workman Vehicles
(HD-Series Models with a Manual
Transmission)
For HD- and HDX-Series Workman models with
a manual transmission, fully install the Rear PTO
Kit for Heavy-Duty Workman Vehicles; refer to the
Figure 4
4. Clevis pin
5. Lynch pin
Installation Instructions for the Rear PTO Kit for Heavy
Duty Workman Vehicles.
High-Flow Hydraulics Kit,
Workman HDX-Auto Utility Vehicle
(Non-TC—HDX-Auto Model)
Fully install the High-Flow Hydraulics Kit for Workman
HDX-Auto Utility Vehicles; refer to the Installation
Instructions for the High-Flow Hydraulics Kit,
Workman HDX-Auto Utility Vehicle.
Lifting the Sprayer Skid
Using lifting equipment with a 408 kg (900 lb) lift
capacity, lift the tank skid from the shipping crate at
g002369
the 2 front and 2 rear lift points
Note:
Ensure that the tank skid is raised high enough
to install the jack stands.
1. Rear lift point
Multi Pro Workman Turf Sprayer
Finishing Kit (HD-Series Models
with a Manual Transmission)
For HD- and HDX-Series Workman models with
a manual transmission, complete the steps in the
Multi Pro WM Turf Sprayer Finishing Kit for Manual
Workman Utility Vehicles; refer to the Installation
Instructions for the Multi Pro WM Turf Sprayer
Finishing Kit, Manual Workman Utility Vehicle.
12
(Figure 5).
Figure 5
2. Front lift point
g023738