Toro Multi Pro 41240 Operator's Manual page 81

Figure 118
1. Manifold (master-boom
valve)
2. Valve mount
3. Flange locknut (1/4 inch)
3. Remove the flange-head bolt (1/4 x 3/4 inch)
and flange locknut (1/4 inch) that secure the
master-boom valve to the valve mount and
remove the valve manifold from the machine
(Figure 118).
Note:
Retain the flange-head bolt, flange
locknut, and retainer for installation in
the Master Boom Manifold Valve (page
g033591
4. Flange-head bolt (1/4 x
3/4 inch)
5. Retainer
6. Socket (90° outlet fitting)
Installing
86).
Removing the Section Manifold
Valve
1. Remove clamps and gaskets that secure the
manifold for the section valve
adjacent section valve (if left section valve, and
the reducer coupling).
1. Flange (reducer coupling)
2. Manifold (section valve)
3. Flange (adjacent section
valve)
2. Remove the retainers that secure the outlet
fitting to the section valve manifold and the valve
manifold to the bypass fitting
81
(Figure 119) to the
Figure 119
4. Gasket
5. Flange clamp
(Figure 120).
g028236