Toro Multi Pro 41240 Operator's Manual page 87

Figure 130
1. Manifold (master-boom
valve)
2. Valve mount
3. Flanged locknut (1/4 inch)
6. Secure the outlet fitting coupling fitting by
inserting a retainer into the socket of the outlet
fitting (Figure 130).
7. Assemble the agitation valve to the valve mount
with the flanged-head bolt and flanged locknut
(Figure 129) that you removed in step
Removing the Master Boom Manifold Valve
(page 80), and torque the nut and bolt to 10 to
12 N∙m (90 to 110 in-lb).
g033591
4. Flanged-head bolt (1/4 x
3/4 inch)
5. Retainer
6. Socket (90° outlet fitting)
3 of
Installing the Section Manifold
Valve
1. Insert the upper end-cap fitting of the manifold
valve into the bypass fitting
Note:
If needed, loosen the mounting hardware
for the bypass fitting to provide clearance.
1. Flange (reducer coupling)
2. Socket (bypass fitting)
3. Bypass fitting
4. Flange (adjacent
manifold—agitation valve)
5. End-cap fitting (manifold
valve assembly)
2. Secure the end-cap fitting to the bypass fitting
by inserting a retainer into the socket of the
bypass fitting
3. Assemble the outlet fitting onto the lower
end-cap fitting of the manifold valve
131A).
4. Secure the end-cap fitting to the outlet fitting by
inserting a retainer into the socket of the outlet
fitting (Figure
5. Align a gasket between the flanges of the
reducer coupling and the section valve manifold
(Figure 131B).
6. Assemble the reducer coupling, gasket, and
section valve manifold with a clamp and tighten
by hand (Figure
7. If installing the 2 left most section valves, align
a gasket between the flanges of the 2 adjacent
section valve manifolds
8. Assemble the 2 adjacent section valve manifolds
and gasket with a clamp and tighten by hand
(Figure 131B).
87
(Figure 131A).
Figure 131
6. Socket (outlet fitting)
7. Retainer
8. Flange (manifold—section
valve)
9. Gasket
10. Flange clamp
(Figure 131A).
131A).
131B).
(Figure 131B).
g033609
(Figure