Toro Multi Pro 41240 Operator's Manual page 32

Figure 45
1. Freshwater-tank mount
2. Flange locknut (5/16 inch)
3. Freshwater tank
2. Torque the bolts and nuts to 20 to 25 N∙m (175
to 225 in-lb).
g033570
4. Mount strap
5. Flange-head bolt (5/16 x
5/8 inch)
Installing the Tank-Support Tube
1. Align the support tube for the freshwater tank
with the tank-support channel
1. Jam nut (5/16 inch)
2. Support tube (freshwater
tank)
3. Front of the machine
4. Top of the machine
2. Align the holes in the support tube with the holes
in the channel
3. Secure the tube to the channel
the 2 shoulder bolts (1/2 x 1-15/16 inches) and 2
flange locknuts (5/16 inch).
4. Torque the bolts and nuts to 20 to 25 N∙m (175
to 225 in-lb).
5. Thread the jam nut (5/16 inch) into the bolt (5/16
x 1 inch) as shown in
6. Thread the bolt (5/16 x 1 inch) and jam nut into
the weld nut at the bottom of the tank support
channel and tighten the bolt and jam nut by
hand (Figure 46).
32
(Figure
Figure 46
5. Bolt (5/16 x 1 inch)
6. Flange locknut (5/16 inch)
7. Weld nut (support
channel—freshwater
tank)
8. Shoulder bolt (1/2 x
1-15/16 inches)
(Figure 46).
(Figure
Figure 46.
46).
g033572
46) with