Table of Contents
Advertisement
4.
Assemble the rate control valve manifold,
gasket, and agitation-valve manifold with a
flange clamp and tighten by hand
5.
Assemble the rate control valve to the valve
mount with the 2 flanged-head bolts and 2
flanged locknuts
in step
3
of
Removing the Rate Control Manifold
Valve (page
78), and torque the nut and bolt to
10 to 12 N∙m (90 to 110 in-lb).
6.
Assemble the outlet fitting onto the coupling
fitting at the bottom of the manifold for the rate
control valve
(Figure
7.
Secure the outlet fitting coupling fitting by
inserting a retainer into the socket of the outlet
fitting
(Figure
126B).
8.
If you loosened the mounting hardware for the
pressure filter head, tighten the nut and bolt to
10 to 12 N∙m (90 to 110 in-lb).
Installing the Agitation Manifold
Valve
1.
Align the flange of the agitation-valve manifold,
a gasket, and the flange of the agitation bypass
valve
(Figure
127).
Note:
If needed, loosen the mounting hardware
for the master-boom valve as needed to provide
clearance.
(Figure
(Figure
126A) that you removed
126B).
126A).
1. Flanged-head bolt (1/4 x
3/4 inch)
2. Gasket
3. Manifold (agitation valve)
4. Flanged locknut (1/4 inch)
2.
Assemble the agitation bypass valve, gasket,
and agitation-valve manifold with a flange clamp
and tighten by hand
3.
Align a gasket between the flanges of the rate
control valve and the agitation-valve manifold
(Figure
1. Flange (rate control valve)
2. Flange (master-boom
valve)
3. Flange clamp
4. Gasket
85
Figure 127
5. Flange clamp
6. Valve mount
7. 3-pin connector (valve
actuator—agitation valve)
(Figure
128).
128A).
Figure 128
5. Coupling (manifold-valve)
6. Socket (outlet fitting)
7. Retainer
g033604
g033605
Advertisement
Chapters
Table of Contents
