Toro Multi Pro 41240 Operator's Manual page 45

5. Once the right-most value is set, press the right
selection button.
Note:
The Save Icon appears above the center
selection button (Figure
6. Press the center selection button
to save the programming for application rate.
7. Press the center selection button to highlight the
application rate for sprayer program 2.
Note:
The icon for sprayer application rate 2
looks like the numeral 2 in a circle to the right of
a bull's-eye target.
Note:
You can use the application rate for
sprayer program 2 to conveniently apply a
higher or lower application rate to your turf site
as needed.
8. Repeat steps 4 through 6.
Programming the Application Boost Rate
The application boost adds a specified percent to
the active program application rate when the outer 2
buttons of the InfoCenter are pressed while spraying
in Automatic mode.
1. From the Home screen, press the center
selection button to navigate to the Main Menu.
2. If needed, press the center selection button to
highlight the application rate boost
Note:
The icon for the application rate boost
look 2 (+) signs to the right of a bull's-eye target
(Figure 67).
Figure 67
3. Press the right selection button
increase the boost percentage in 5% increments
(20% maximum).
66D).
(Figure 66D)
(Figure 67).
g028513
(Figure 67) to
Using the Settings Menu
HDX-Auto Model
Selecting the Active Application Rate from the
Settings Menu
1. From the Main Menu, press the center selection
button to navigate to the Settings menu.
2. Press the center selection button to highlight the
Active application rate setting
3. Press the right selection button to toggle
between application rate 1 and 2
4. Press the left selection button to save and return
to the main menu
Setting the Tank-Level Alert
1. From the Main Menu, press the center selection
button to navigate to the Settings menu.
2. Press the center selection button to highlight the
Alert setting (Figure
Note:
The (-) and (+) icons appears above the
center and right selection buttons.
3. Press the right selection button
4. Use the center or right selection buttons to enter
the minimum quantity in the tank when the alert
displays during sprayer operation
45
(Figure 68).
Figure 68
(Figure
69).
Figure 69
(Figure
(Figure
g028520
68).
g028521
69).
69).