Table of Contents
Advertisement
Figure 21
HDX-Auto Model
1. Center console
2. J-clip
2.
Install a J-clip behind the passenger seat
22) using a bolt (1/4 x 1/2 inch) and a flanged
nut (1/4 inch).
Figure 22
1. J-clip
3.
Secure the control console harness to the
console and ROPS cover using the J-clips
(Figure
22).
g028443
3. Existing screws
4. Control-box harness
(Figure
g024089
Connecting the Rear Electrical
Harness to the Front Electrical
Harness at the Control Console
1.
Align the 2 keys of the 38-pin connector of the
rear wire harness for the sprayer with the 2
keyways of the 38-socket connector of the front
wire harness connected to the control console
(Figure
23).
1. 38-socket connector (front
wire harness—control
console)
2. Alignment keys
2.
Plug the rear wire-harness connector into the
front wire harness connector until the latches of
the connectors snap together securely
23).
20
Figure 23
3. 38-pin connector (rear
wire harness—sprayer)
g033524
(Figure
Advertisement
Chapters
Table of Contents
