Hitch Leveling Installation - Landoll 2132 Operator's Manual

ASSEMBLY INSTRUCTIONS

Hitch Leveling Installation

1. Connect narrow end of the leveler tower to the top
hole on rear of the hitch assembly using 1-1/4-7 x
9-1/2 hex head cap screw, slotted lock washer, and
hex nut See Figure
2. Connect rear of leveler tube weldment to the middle
holes of center lift assembly using hitch pins, 1 lock
nuts, and 1/2 x 2-1/4 roll pins.
3-6
3-4.
3. Connect front of leveler tube weldment to the rear
hole of leveler tower using hitch pin, 1 lock nuts and
1/2 x 2-1/4 roll pin.
4. Attach the rear of the radius assembly to the front
hole of the leveler tower using hitch pin, 1 lock nut
and 1/2 x 2-1/4 roll pin.
NOTE
(See "Variable Ratio Adjustment" on page 4-8.)
more details.
for
F-1099-0521