Landoll 2132 Operator's Manual page 121

5. To fold/unfold the 2132 Coulter Chisel, find a level
area large enough to accommodate the implement
when it is fully unfolded. The tractor should be
stopped and not moving with the unit fully raised.
Remove the 3/16" dia hair pins, wing lock pins from
the wing stabilizer transport position and install them
in the storage locations
IMPORTANT
Failure to remove the wing lock pins when unfolding
will result in serious damage to the implement. Be
sure other people and pets are a safe distance away.
If pins are not removed during unfolding, the wing
stabilizer plate and pins should be replaced if
damaged.
WING LOCK PIN,
3/16" DIA HAIR PIN,
TRANSPORT POSITION
See Figures 4-5.
WING LOCK PIN,
3/16" DIA HAIR PIN,
FIELD POSITION
Figure 4-5: Fold Transport Locks
OPERATION AND MAINTENANCE
6. Slowly engage the tractor lever and fold/unfold the
wing frames. When the wings are unfolded, continue
holding the tractor lever to fully extend all fold
cylinders. This will allow the wings to fully flex in the
field.
7. When the unit is fully folded, remove the transport
lock pins from the storage location and install in the
mounts provided on each side of the machine.
WING STABILIZER
BRACKET
4-5