Drawbar Hitch Installation - Landoll Brillion P Series Operator's Manual

ASSEMBLY

Drawbar Hitch Installation

1. Mount the flat spring to the bottom of the drawbar
with 3/8-16 x 1" long Screws, 3/8" Lockwashers and
3/8" Nuts.
2. Mount the clevis to the drawbar with a 1" x 8 1/4" Pin
and (2) 1/4" x 1 1/2" Cotter Pins. The flat spring
support aids in the attaching of the pulverizer to a
tractor or implement. See Figure 2-9.
2-8
3. Attach the jack to the round tube near the hitch with
4. Using a 5/8-11 x 2" Screw and 5/8" Lockwasher and
Figure 2-9: Drawbar Hitch Installation
the pin and chain.
a 1" Flat Washer, bolt the hose support through the
drawbar and secure with a 5/8" Flat Washer and 5/8"
Nut.
9J017