Table of Contents
Advertisement
ASSEMBLY INSTRUCTIONS
Hitch Leveling Installation
1. Connect narrow end of the leveler tower to the top
hole on rear of the hitch assembly using 1-1/4-7 x
9-1/2 hex head cap screw, slotted lock washer, and
hex nut
See Figure
2. Connect rear of leveler tube weldment to the middle
holes of center lift assembly using hitch pins, 1 lock
nuts, and 1/2 x 2-1/4 groove pins.
3-10
3-8.
3. Connect front of leveler tube weldment to the rear
hole of leveler tower using hitch pin, 1 lock nuts and
1/2 x 2-1/4 groove pin.
4. Attach the rear of the radius assembly to the front
hole of the leveler tower using hitch pin, 1 lock nut
and 1/2 x 2-1/4 groove pin.
F-1102-0721
Advertisement
Table of Contents
