Leveling The Hitch Clevis - Landoll 5110NG Operator's Manual

c. Remove the L-pins, hairpin clips, and transport
locks from both cylinder shafts.
SPEED IDENTIFICATION SPEED IDENTIFICATION
SYMBOL (SIS) 20 MPH SYMBOL (SIS) 20 MPH
JACK, STORAGE JACK, STORAGE
POSITION POSITION
JACK, PARKING
POSITION
7-PIN 7-PIN
CONNECTOR CONNECTOR
HYDRAULIC HYDRAULIC
HOSES HOSES

Leveling the Hitch Clevis

1. The hitch clevis height should be adjusted to match
the drawbar height of the tractor. This will allow the
hitch to operate through its most efficient range and
level throughout the field
2. On a level surface, measure from the ground to the
top side of the tractor drawbar. For drawbar heights
18" or lower use the lower hitch clevis holes. For
drawbars 20" tall use the middle hitch clevis holes,
and for 22" or greater use the top mounting holes.
IMPLEMENT HITCH IMPLEMENT HITCH
DRAWBAR DRAWBAR
SAFETY CHAIN SAFETY CHAIN
Figure 4-7: Attaching Pull Hitch to the Tractor (Optional)
See Figure 4-8
OPERATION AND MAINTENANCE
d. Return the transport locks, L-pins, and hairpin
clips to the storage locations on the hitch.
SAFETY LIGHTS SAFETY LIGHTS
TRANSPORT LOCK & PINS, TRANSPORT LOCK & PINS,
TRANSPORT POSITION TRANSPORT POSITION
TRANSPORT LOCK & PINS, TRANSPORT LOCK & PINS,
FIELD POSITION FIELD POSITION
Figure 4-8: Hitch Clevis Height
SMV EMBLEM SMV EMBLEM
SPEED IDENTIFICATION SPEED IDENTIFICATION
SYMBOL (SIS) 20 MPH SYMBOL (SIS) 20 MPH
SAFETY LIGHTS SAFETY LIGHTS
HITCH CLEVIS
HEIGHT
ADJUSTMENT
4-5