Landoll 2132 Operator's Manual page 101

WRENCH MOUNT,
HOSE MOUNT PLATE,
1/2 X 8-1/2 BOLT,
1/2 FLAT WASHER
1/2 LOCK NUT
NOTE: WRENCH MOUNT ASSEMBLY
USED ON LEFT CENTER FRAME
ARM ASSEMBLY ONLY, HOSE MOUNT
ASSEMBLY USED ON HYDRAULIC
REEL ONLY
REEL ASSEMBLY
GANGBAR MOUNT
PLATE, 3/4 X 5-1/2 BOLT,
3/4 LOCK NUT
Figure 3-26: Standard or Hydraulic 3BCT/Chopper Installation (Option)
HARROW ADJ WRENCH,
QUICK HITCH PIN
HOSE CLAMP,
3/8 X 1-1/2 BOLT,
3/8 FLAT WASHER,
3/8 LOCK NUT
HYD COMBO
ARM LONG
NOTE: HYDRAULIC REEL ARMS
SHOWN, STANDARD REEL ARMS
SAME EXCEPT CYLINDERS NOT USED
ASSEMBLY INSTRUCTIONS
COMBO HARROW
MOUNT ARM,
3/4 X 2-1/2 BOLT,
3/4 FLAT WASHER
3/4 LOCK NUT
HARROW STIFFNER
PLATE, HARROW
ADJ TUBE
5/8 X 3-11/16 X 6-3/8
U-BOLT, 5/8 FLANGE
LOCK NUT
TINE HARROW
ASSEMBLY
3-35