Reader 2 Mode - IDTECK FINGER007 Manual

RF ONLY
Users can access the door by presenting their card or entering their ID number.
RF+F/P (P/W)
Users can access the door by presenting their card or entering their ID number and th
en verifying their identity by a fingerprint. For users who did not register their fingerpr
ints, password verification is used instead of fingerprint verification.
RF+P/W+F/P
Users can access the door by presenting their card or entering their ID number and th
en verifying their identity by both a fingerprint and a password.
1.5

Reader 2 Mode

If you have an external reader connected to the FINGER007 (referred to herein as Reader 2),
you must adjust this setting according to what access mode is used on Reader 2.
To change the Access Mode for Reader 2, press <ENT>, select the desired mode by pressing
<4> or <6>, and then press <ENT> again to confirm.
RF ONLY
Select this option if Reader 2 is operating without password verification
RF+ P/W
Select this option if Reader 2 uses password verification.
p.47 Setting Changes