Adaptive Mode; Fp Status; High Security 설정 - IDTECK FINGER007 Manual

DUAL FIN
GER
NOT USE
USE
4.11

ADAPTIVE MODE

The Adaptive Mode is a feature that improves the quality of fingerprint images in the authe
ntication process, guaranteeing a higher likelihood of successful authentication. However, t
he authentication process may take longer with this feature on.
To enable or disable the Adaptive Mode, press <ENT> and press <4> or <6> to select "ENABL
E" or "DISABLE" and press <ENT> to confirm.
4.12

FP STATUS

FP Status is a special feature designed for special environments where the fingers of most e
mployees might be too dry or wet. If you set the FP Status setting to dry or wet, the FINGER
007 will adjust the fingerprint images according to the environment to improve the authenti
cation rate.
To change the setting, press <ENT> and press <4> or <6> to select "NORMAL", "DRY" or "WE
T" and press <ENT> to confirm.
4.13 HIGH SECURITY 설정
p.79 Setting Changes
Number of Templates and Fingers
2 Storage Templates for a single fi
nger.
1 Storage Template each for 2 diff
erent fingers.
Authentication Succe Recommended Authentica
ss Ratio tion Mode
High Identification Mode
Low Verification Mode