Want To Access With Fingerprint Only, Without Card Or Password; Please Check If Identification Mode Is Set To "Use; Fingerprint Is Not Recognized; Please Check The Status Of The Fingerprint - IDTECK FINGER007 Manual

on.
ID+P/W+F/P
In this mode, users can access the door by presenting their card or entering their ID
number and then verifying their identity by both a fingerprint and a password.
If the problem persists, please contact service center.
11 I want to access with fingerprint only, without card or
password.
11.1

Please check if IDENTIFICATION mode is set to "USE".

See [Setting Changes] > [SETUP MENU F4] > [Identification Mode] of the manual and set ID
ENTIFICATION MODE to "USE".
If the problem persists, please contact service center.
12 A fingerprint is not recognized.
12.1

Please check the status of the fingerprint.

If something is attached to fingerprint, fingerprint recognition may not work properly.
●
→ Remove it.
If a fingerprint has a scar, fingerprint recognition may not work properly.
●
→ Register other fingerprint without a scar.
p.93 Troubleshooting