Reader Connections(Extra Reader) - IDTECK Star Finger007 User Manual

- Connect NO port of Relay 2 to (+)wire of Alarm devices.
- Connect GND port to (-)wire of Alarm devices
CAUTION : Please add one DIODE as shown above.
DIODE : Fast recovery DIODE(current : Min. 1A), 1N4001 ~ 1N4007 or similar

5.4.4 READER CONNECTIONS(Extra Reader)

Proximity Reader Connection
- Connect (+)wire of the Proximity Reader to +12V(Red wire)
- Connect (-)wire of the Proximity Reader to GND(Black wire)
- Connect Data-0 wire of the Proximity Reader to DATA0(Pink wire)
- Connect DATA-1 wire of the Proximity Reader to DATA1(Cyan wire)
• Compatible Readers(Extra Reader) :
FINGER007/iPFINGER007: Standard 26bit Wiegand Format Proximity Readers
FINGER007SR : Standard 34bit Wiegand Format Proximity Reader
• Recommended Readers :
FINGER007 : RF-TINY, RF10/20/30/70/500, RFK101, FGR006, FGR006EX
iPFINGER007: iP10/20/30, iPK101
FINGER007SR : SR10/20/30, SRK101, FGR006SRB
20030516
Figure : DOOR LOCK, ALARM DEVICE CONNECTIOIN
Standard 26bit Wiegand + 8bit Burst Format Proximity and keypad Reader
Standard 34bit Wiegand + 8bit Burst Format Proximity and keypad Reader
STAR FINGER007
16
User's Manual