Reader 2 Mode; Master Id Registration - IDTECK Star iCON100SR User Manual

RF ONLY
Users can access the door by presenting their card or entering their ID number.
RF + Password
Users can access the door by presenting their card or entering their ID number and th
en verifying their identity by a Password.
1.5

Reader 2 Mode

If you have an external reader connected to the iCON100 (referred to herein as Reader 2), y
ou must adjust this setting according to what access mode is used on Reader 2.
To change the Access Mode for Reader 2, press <ENT>, select the desired mode by pressing
<4> or <6>, and then press <ENT> again to confirm.
RF ONLY
Select this option if Reader 2 is operating without password verification
RF+ P/W
Select this option if Reader 2 uses password verification.
1.6

Master ID Registration

Master ID is the number/card that you use to enter the Setup Mode. For security reasons, it i
s advisable that you change the default Master ID immediately and keep the new Master ID
p.44 SETTING CHANGES