Table of Contents
Advertisement
as follows;
1. Set "READER 1 MODE" to RF+F/P Mode.
(See
1.4 Reader1
2. Define T/S code 01 so that it can include a Time Interval between 09:00 and 17:00 for t
he desired days of the week. (See
3. Here in Reader T/S, press <ENT>, enter the 2Digit T/S code (In this case, 01), and then p
ress <ENT> again to confirm.
4. To return to the previous menu, press <ESC>.
2.5
Input / Output Definition
In/Output Define allows you to adjust In/Output settings (Output activation time, In/Output
Time Schedule, Cut-Off Check, etc.).
To change the In/Output Settings, press <ENT> and select an item using <4> or <6> key, and
Setup Menu F2
Mode)
1.1 Time
Setting)
p.56
Advertisement
Table of Contents
