Table of Contents
Advertisement
2.2
Rear View
1. Initialization Switch
This switch is used to initialize Star FINGER007. For initialization, press down this switch
and then keep it more than 2 seconds. Refer to '8.2 System Initialization' for more detail
s.
2. Communication Display LED
#3, #4(yellow, green) LED will twinkle during RS232, RS422 and TCP/IP communication.
If the LAN is connected normally during TCP/IP communication, #1, green LED will turn
on. But in the collision status, #2, red LED turns on.
Figure: Magnification of the Communication Display LED in the Rear Panel
p.17
Product Overview
Advertisement
Table of Contents
