Table of Contents
Advertisement
4.3
Output Test
Output Test allows you to test the output ports of the FINGER007. To begin the test, press
<ENT>.
First, output ports1 and 2 will be tested. During the test, relay outputs are activated and you
will hear Tick-Tack sounds with the green LED blinking twice. Second, output oorts3 and 4
will be tested. During the test, TTL outputs are activated and the yellow LED blinks twice. Yo
u can check the voltage level of the TTL outputs with appropriate test equipment. Lastly, out
put port 5 will be tested. During the test, you will hear 2 beeps. After all the tests are over, p
ress any key to exit.
Setup Menu F4
p.74
Advertisement
Table of Contents
