Table of Contents
Advertisement
This feature only applies to the FINGER007SR.
By default, the FINGER007SR can read smart card written in the 4BYTE format, but, for adva
nced applications, you can use 2BYTE format smart cards. To do so, you must change the D
ata BYTE setting to "2BYTE". To change the setting, press <ENT> and press <4> or <6> to sel
ect "4BYTE" or "2BYTE" and press <ENT> to confirm.
4 Byte (Default)
The Card Number can be in the ranges of 00000000 – 4294967295.
2 Byte
The first and last 5 digits can each be in the ranges of 00000 ~ 65535, respectively.
The total is in the ranges of 0000000000~6553565535
p.63
Setting Changes
Advertisement
Table of Contents
