ENABLE
The Anti-Pass Back feature is enabled.
ALL CLEAR!
All Anti-Pass Back flags are reset, and access will be allowed one time regardless of th
e current status of the existing flags.
2.8
RF PIN Input
RF Pin Input allows you to decide whether to enable or disable PIN (or RF card number) Inpu
t via the keypad. By default, PIN Input is disabled.
If you choose "Disable", you cannot gain access via password input when using RF
+PW mode.
2.9
Event Alarm
Event Alarm allows you to decide whether to enable or disable the event memory full alarm.
If you enable Event Alarm, the FINGER007 beeps with an alarm message when the event me
mory becomes more than 90% full.
To enable or disable Event Alarm, press <ENT> and press <4> or <6> to select "ENABLE" or "D
ISABLE", and then press <ENT> again to confirm.
If the event memory becomes full, the oldest event data is overwritten and lost.
p.59
Setting Changes