Thermostat - KYMCO DINK50 Service Manual

11
. COOLING SYSTEM

THERMOSTAT

THERMOSTAT REMOVAL
Remove the seat, met-in box and center
cover.
Drain the coolant.
Disconnect the water hose from the
thermostat housing.
Remove the mounting bolt and the
thermostat housing from the cylinder head.
Remove the thermostat from the thermostat
housing.
THERMOSTAT INSPECTION
Suspend the thermostat in a pan of water
over a burner and gradually raise the water
temperature to check its operation.
Technical Data
Begins to open
Full-open
Valve lift
11-13
www.PlanDeGraissage.org
80±2℃
90℃
3.5_ 4.5mm
Bolt
Thermosensor Wire
Bolts
Thermostat
Thermostat
Thermostat Housing
Water Hose
Thermometer