Assembling The Jg Terminal And Power Cable - Huawei AP7052DN Hardware Installation And Maintenance Manual

AP7052DN&AP7152DN
Hardware Installation and Maintenance Guide
Stop heating the shrink tubing when the connector is securely locked in the shrink tubing. Do
not heat the shrink tubing too long as this may damage the insulation coating.
----End

5.1.2.4 Assembling the JG Terminal and Power Cable

Context
Figure 5-27 shows the components of a JG terminal and a power cable.
Figure 5-27 Components of a JG terminal and a power cable
A. JG
terminal
Procedure
Step 1 Strip a part of the insulation to expose the cable conductor with a length of L, as shown in
Figure 5-28. The recommended values of L are listed in Table 5-3.
Issue 01 (2017-12-29)
B. Heat-shrinkable
tubing
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
C. Insulation layer of a
power cable
5 Appendix
D. Conductor of a
power cable
51