Huawei AP7052DN Hardware Installation And Maintenance Manual page 54

AP7052DN&AP7152DN
Hardware Installation and Maintenance Guide
Figure 5-20 Checking reliability
 Ensure that the short circuit does not occur between the positive and negative holes of the
connector.
 Ensure that the short circuit does not occur between the metal enclosure and connector's
positive and negative holes.
Step 10 If devices are installed outdoor, wrap three layers of PVC insulation tape around the
connector for protection, as shown in Figure 5-21.
Figure 5-21 Wrapping PVC insulation tape
Ensure that proper quantity of the PVC insulation tape is used for wrapping the connector,
facilitating the connector uninstallation in later maintenance.
----End
Issue 01 (2017-12-29) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Appendix
47