Huawei AP7052DN Hardware Installation And Maintenance Manual page 75

AP7052DN&AP7152DN
Hardware Installation and Maintenance Guide
Figure 5-57 Shielded RJ45 connector
1: Core wires
Procedure
Step 1 Strip 20 mm outer jacket off the network cable, peel off the braid shield backward, and cut off
the aluminum foil and protection band, as shown in Figure 5-58.
Ensure that the shielded layer is intact when stripping outer jackets off the network cable.
Keep the cable insulation intact when stripping the shielded layer.
Issue 01 (2017-12-29)
2: Aluminum foil 3: Braid shield
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4: Outer jacket 5: RJ45 connector
5 Appendix
68